The misplacing of the automobile key is a common and frustrating issue for motorists. The forms, technology, alternatives, and issues associated with automobile keys are extremely diverse. Vehicle keys, their history, and the technology that has developed them are all topics covered in depth in this article.
How to Start a Car Without a Key
As we’ve shown in the previous sections, there are times when you really need to start your car but can’t because your keys are broken or missing. Finding a way to turn the key in the ignition of a locked car is quite similar to fixing a broken switch. Most of the methods we’ll go over here are applicable to vehicles from earlier model years. Until you can either locate a spare key or have a locksmith cut you new keys, these solutions will have to do.
Method 1:
Here you can find instructions on how to use a hammer and screwdriver to start an automobile. While this method is the simplest, you must exercise caution to avoid damaging the ignition switch of your vehicle. Disabling lock pins with this method is effective, however it permanently ruins the vehicle’s system. About two and a half inches from the beginning of the inner flaps, drill a keyhole.
Put everything back where it belongs after drilling by removing the drills and locking bits. Drilling can be resumed once the locking bits are in place. Put the head of a screwdriver, a flat piece of metal, or any key into the ignition to start the car. You should be able to start your car normally if you follow this simple method.
To shatter the locking pins, you can use a hammer instead of a drill if you don’t have one. Hammer down on the keyhole while inserting the screwdriver. The ignition’s locking pins can be more easily broken using this method.
Method 2:
In the event that you lose the keys to your car, hotwiring is an excellent alternative. Going around the ignition system is what it’s called. The vast majority of vehicles produced up until the mid-90s are compatible. Remove the plastic cover from the steering wheel column.
Before you can remove the cover from the steering column, you must unscrew the two screws on each side. Gaining access to the ignition system is possible with this.
Put on your insulated or protective gloves before moving on to the following stage. Identifying the starter and battery cables should be a priority. Typically, the brown and yellow wires are for ignition, and the red wire is for the battery.
At the very end of the battery wires, cut a small piece of insulation. Separate the power cables that originate from the cylinder by using a cutter. The battery wire and the power wire should be twisted together.
After you finish the previous steps, you should be able to turn on the vehicle’s lights, radio, and ignition. The next step is to remove the insulation and obtain the wire that connects to the starter motor.
You should never twist these wires since they are vital. Attach it to the cables and remove it from the vehicle the moment it starts up. If you want to avoid getting shocked, tape the end of the wire.
Method 3:
Alternatively, you can use this technique to get your automobile started without using a key or hotwiring. For those with a better grasp of the mechanics, this is the next phase. Look for the red coil wire under the wood. Starting at the positive end of the battery, insert the jump starting cable into the red wire leading to the coil or the positive terminal of the coil itself. Now the dashboard will receive power.
Locating the starter solenoid requires opening the steering wheel. Join the positive terminal of the vehicle battery to the solenoid. Remove the lead from the solenoid switch that controls the ignition. Connect the positive terminal of the solenoid to the location where the ignition switch is attached using a screwdriver.
You will have directly connected 12V to the battery when you employ this procedure. When you do this, the starter will crank the vehicle since the solenoid is activated. In our post about how to start a car with a broken ignition switch, you can find more information about this procedure.
Conclusion
You, the driver, should not be surprised if you have difficulties with automobile keys, key fobs, ignition cylinders, and switches. From a basic battery problem that you can tackle manually to more complex problems that require advanced machinery and experience, the information above should help you diagnose your car’s trouble. Seek the advice of a professional or certified dealer if you are unsure of the proper way to start your vehicle or the reason it is not starting.
