Over time, a lot of carbon builds up in the engine and fuel injectors as it runs. This makes the car use more gas and get worse gas economy. The fuel valves can get clogged, which makes the car use more gas.
Every 30k miles, you should clean your fuel injectors. You need to be a skilled worker to clean your fuel injectors because you have to take them off, clean them on a bench, and then put them back on.
You won’t have to go through those problems after reading this article because I will show you how to clean fuel injectors without taking them out.
How to Clean Fuel Injectors without Removing Them?
This is a simple guide on how to clean fuel injectors at home without taking them out.
Step 1. Get a fuel injector cleaning kit
Get a fuel injector cleaning tool that works with the type and make of your car. You should buy a cleaning tool with a hose that links to the fuel rail and fuel injectors, as well as a can of fuel injector cleaning solvent that works better than other cleaning solvents at getting rid of hard carbon buildups.
Step 2. Locate the fuel rail
The fuel line is a very important part of the fuel system. Gas is sent to the fuel tanks by this part. Different cars have fuel rails in different places. So, to find your fuel rail, you should look in your owner’s manual.
Step 3. Disconnect the fuel rail
After that, you should take the fuel rail off. To get rid of some fuel rails, you’ll have to press down on the clips. For some, you have to open the clamps and hold them with a screwdriver in order to pull them off. For others, you have to remove the bolt that holds the fuel rail and a lead pipe from the gas tank. No matter how the fuel rail is built, you need to disconnect it so that you can later connect the fuel injector cleaning kit.
Step 4. Disconnect your fuel regulator pressure line (if your car has one)
Find the pressure control and take the vacuum line off of it. Pull it out slowly to get rid of it. You can find out if your car has a pressure adjuster by reading the owner’s manual. Most of the time, the regulator is close to the nozzles.
Step 5. Fill the fuel injector cleaning kit with a solvent
Open the fuel injector cleaning kit’s lid and pour the cleaning solvent inside. Fill the fuel cleaning kit all the way to the top.
Step 6. Hang the cleaning kit on the hood
The cleaner kit needs to be put on top of the engine. You need to connect the cleaning kit to the hood. You can hook the cleaning kit to the hood with the hook that’s on it.
Step 7. Connect the kit outlet pipe to the fuel rail
Once the cleaning kit is up, you need to connect the kit’s outlet pipe to the fuel rail that is no longer linked. It’s easy to use the cleaning kit on a lot of different cars because it comes with a lot of different connectors. Put the cleaning solvent on the large connection and connect it.
Step 8. Remove the fuel tank cover to prevent pressure buildup.
By forcing cleaning fluid under pressure into the fuel injectors, the cleaning kit will get rid of dirt and grime. Before you start cleaning, make sure you take off the cover for the fuel tank. This will keep the gas from building up too much, which could lead to combustion.
Step 9. Remove the fuel pump relay
To stop the fuel pump from sending gas to the engine, find the fuse box and take out the fuel pump switch. The fuse box has a number of switches that are all the same size and shape. To find the correct fuel pump relay, it is best to look in the owner’s manual.
Step 10. Connect the air compressor to the cleaning kit
Connect the air compressor to the cleaning kit. Make sure the compressor is hooked up to the fuel injector cleaning kit’s air intake connection, and set the PSI to 40, 45, or 50. To get the cleaning liquid into the fuel rail, you need air that is under pressure.
Step 11. Start your car
Once you start your car, let the engine run for a few minutes until there is no more oil in the cleaning kit. Turn off your engine and remove the fuel injector cleaning kit as soon as you see that the cleaning solvent is gone from the kit.
Step 12. Reattach your fuel pump relay and fuel rail hose
Take the line and fittings from the cleaning kit off of your fuel rail. Put the fuel regulator vacuum hose and fuel pump lead hose back on. Put something over the gas tank.
Conclusion
Since you’re still reading, it means you want to know how to clean fuel injectors without taking them out. Additives to fuel are an easy way for any driver or car owner to keep fuel injectors in good shape. Some agents for cleaning fuel don’t just clean the fuel injectors; they clean the whole fuel system. Sea foam is a good example of this. So, you want to know how to use seafoam to clean your fuel injectors. Just like with any other fuel cleaner, you pour it into your gas tank.
