Service Advancetrac is a common warning signal that most Ford drivers will probably see at some point. Ford cars have this and many other warning systems to keep owners safe from impending danger.
What Causes Service AdvanceTrac Light to Come On?
Ford Edge, F150, Fusion, Expedition, and Explorer all have warning lights that flash when the “Service Advancetrac” button is pressed. The light comes on because of a problem with the monitor, which changes how it should work. Among the main reasons for service Advancetrac Light are the following:
Bad sensor wiring
Different stability-related sensors are used by the Advancetrac system. If the wiring cables for one or more of these sensors come loose, it can affect how well the system works. Keep in mind that the issue will not go away until you fix the wiring issue.
Defective wheel speed sensor
The ABS sensor is another name for the wheel speed sensor. These parts are connected to the four-wheel hubs of your Ford. They help the Engine Control Unit (ECU) figure out how fast each wheel is turning.
The wheel speed monitors send data to the ECU, which uses that data to figure out the vehicle’s path and tell when traction is lost. If either the ABS sensor or the wheel speed sensor is broken, they will send the wrong data or no data at all to the ECU. This will set off the service Advancetrac warning light immediately.
Limp mode
A lot of warning lights will probably go off when a car goes into limp mode, including the service Advancetrac danger light. If you want to keep the engine safe, you should do everything you can to stay away from this mode. It turns off many functions in the car.
Tires/wheels mismatch
If you need to change the tyres or wheels on your Ford for any reason, make sure you check the owner’s manual to find the correct tyres or wheels to use.
Using wheels that don’t match may not change how you drive, but the computer system will notice if the wheels are moving too slowly or too quickly through the sensors.
Damaged clock spring
The clock spring turns on the airbag, the steering angle monitor, and the buttons on the steering wheel.
If the clock spring is broken, it will affect how these parts work, especially the steering angle monitor. The Advancetrac system will be affected immediately, and a warning light will come on.
The service Advancetrac warning light on a Ford car can also be caused by a broken steering angle sensor, a broken rotational speed sensor, system programming issues, low battery power, low fluid level, and other things.
Please keep in mind that the Ford 150’s “Advancetrac” service means the same thing as the Ford Explorer’s “Advancetrac” service and some other types.
How Do I Fix Service AdvanceTrac Light?
In the event that you own a Ford and the service Advancetrac warning light is always on, please look into what might be wrong.
If you want to know how to fix service Advancetrac in a Ford Explorer or any other Ford model, it’s extremely simple once you know what’s wrong. But the following fixes can help you fix problems with your Ford’s Advancetrac warning light.
Reconnect sensor wiring
If you find any loose connections in the wiring system of any sensors that affect stability, make sure to connect them correctly. If the problem is caused by bad ground, carefully check the ground straps and fix any problems you find.
Replace any defective or damaged stability components
Because a problem with one or more stability sensors can affect the Advancetrac system, please narrow it down to find the exact sensor that is broken and repair it. If you think you can’t do this yourself, you should call a professional car mechanic.
Correct service Advancetrac error with a scanner
Sometimes, the service Advancetrac warning light will go off by accident, even though the system as a whole is fine. If this happens, please get an OBD II reader to find out what caused the light and fix it.
Conclusion
If you know what “service Advancetrac” means, you’ll know exactly what to do when the display warning light comes on. Ford cars are the only ones that can do this. But it works the same way that other cars’ Electronic Stability Control systems do.
Make sure you do everything you can to keep this danger light from showing up on your dashboard. And if you’re having this problem right now, try the solutions in this post.
